CONTINENTAL
1. Length tolerances for standard CONTI® SYNCHROFLEX polyurethane timing belts
The belt length measurement is carried out according to DIN 7721, referred to the centre distance.
Belt length over [mm] | Belt length up to [mm] | Length tolerance in relation to centre distance [mm] |
---|---|---|
320 | ± 0,15 | |
320 | 630 | ± 0,18 |
630 | 1000 | ± 0,25 |
1000 | 1960 | ± 0,40 |
1960 | 3500 | ± 0,50 |
3500 | 4500 | ± 0,80 |
4500 | 6000 | ± 1,20 |
2. Width tolerance for standard CONTI® SYNCHROFLEX polyurethane timing belts
Type / group | Width tolerances up to 50 mm | Width tolerances 50-100 mm | Width tolerances over 100 mm in % of belt width |
---|---|---|---|
K1 | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
K1,5 | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
T2 | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
M (MXL) | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
T2,5 | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
T5 | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
T5-DL | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
T10 | ± 0,5 mm | ± 0,5 mm | ± 0,5 % |
T10-DL | ± 0,5 mm | ± 0,5 mm | ± 0,5 % |
T20 | ± 1,0 mm | ± 1,0 mm | ± 1,0 % |
T20-DL | ± 1,0 mm | ± 1,0 mm | ± 1,0 % |
AT3 | ± 0,3 mm | ± 0,5 mm | ± 0,5 % |
AT5 | ± 0,5 mm | ± 0,5 mm | ± 0,5 % |
AT10 | ± 1,0 mm | ± 1,0 mm | ± 1,0 % |
ATP10, ATP15 | ± 1,0 mm | ± 1,0 mm | ± 1,0 % |
AT20 | ± 1,0 mm | ± 1,0 mm | ± 1,0 % |
Please note:
Tolerance for special tension members upon request.